|
Save $100!
Register Before July 15th!
Register for the Roundtable here...
Schedule of Events
This schedule is believed to be correct as written but is not guaranteed. Circumstances beyond our control my force changes and prevent us from maintaining this exact schedule of events. If changes occur they will be posted here as soon as we know about them. The items marked TBA have not been finalized and will be added as soon as we finalize plans for them.
Wednesday November 5
True Length Technology TM Fitting Certification Class
Get your Certification to be a True Length Fitter from the developer of the System Dan Connelly
If you are a current True Length Technology TM Registered User you will be certified - $99
If want to become a Registered True Length Technology TM User you will receive all my charts, build methodology and become Certified for $299
Register at the AGCP Web site www.agcpgolf.com
Time: 10 am until 4:30 pm.
OptimalFlight Trajectory Software Certification Class
Presented by Todd Kos of OptimalFlight
NOTE: Participants will need to bring their own laptop with OptimalFlight installed and running.
Current OptimalFlight user: $145
• Dinner
• Hand-out reference book covering training class materials and examples.
• Includes a bonus OptimalFlight license
New OptimalFlight user: $275
• Dinner
• Hand-out reference book covering training class materials and examples.
• Includes two OptimalFlight licenses, and 3 year listing of fitting services.
Time: 5:30 until 8:30
AGCP Annual Roundtable Golf Tournament & Get Together
Woodland Hill Golf Course
Tee Times begin at Noon on Wednesday
Details TBA check this web site for updates
Thursday November 6
9 am til 10:50 - Roy Nix – Welcoming Ceremony
After a brief introduction, to open the session we will go over some key operating ratio numbers so we can tune up our profits for the coming year. Gary Dean (has a degree in Accounting) has compiled and operation ratio survey and will go over the results of the survey and explain what it means for you. Those who participated in the study can purchase a copy for half price and they will be on sale at the Roundtable.
Roy will spend some time on "How to use Computers to Search the Internet and Use AGCP Assets". This has been requested by many of our members.
Roy will also offer a brief Discussion: Marketing/Pricing, & Sales Techniques,
& if we have time we will discuss - Biomechinics & Fitting, or, how changing the golf club can change the golf swing. How to use this for a better fit.
10:50 til 11:00 Break
11 am til 1 pm - Dana Upshaw – Understanding and Interpreting Launch Monitor Data & information on Putter Fitting if time permits
Dana will how us how to use launch monitor data. How & What we need to know, how to read launch monitor data, how to interpret launch monitor data and how to use the data.
1 pm til 2 pm – Break for Lunch
2 pm til 3:50 pm - Bill Kelly – Counter weighting and fitting
Case histories, what works for swing different swing types
Bill works with Tour Lock weights and will give you some of the results for specific swing types and show some pictures and video to explain who and how to fit with butt weights, or how to counterweight clubs for maximum effectiveness for your golfers.
3:50 til 4:00 Break
4:00 til Time remaining... – Mike Moynahan and/or Rich Hurley - Technical Discussion about working with Tour Pros and better players.
More information on this as soon as we have it. Please see the web site for updates.
Friday November 7
9 am til 10:50 - Jerry Hoefling – Fitting Demonstration
Jerry will demonstrate his BMT Driver Fitting live.
Jerry, like Dana the day before will spend some time letting someone hit balls and analyzing the results of the data from the launch monitor and swing analysis equipment. Some hands on and Q & A from the audience should bring some information about how to interpret the data and what to do about it. A good live demonstration of how to do a fitting. Jerry will focus primarily on Driver fitting with his BMT Driver Fitting Software. We hope to be able to fit 10 of our attendees during this session. If you want to be fitted, bring your driver. You may be one of the lucky 10 names drawn.
10:50 til 11 Break
11:00 til Noon - Ubie & Putter Fitting
details TBA
Noon til 1 pm – Break for Lunch
1 pm til 3 pm - Tom Spargo – Discussion: Marketing, Business, How to run a custom shop
Tom owns the state of Rhode Island and is Mr. Custom Golf. Tom will share some of his secrets for success with a custom golf business. Take notes if you want to increase your business and your profits next year. Tom has been doing this for a long time and he has been very successful. Maybe you can pick up some tips to help you in your shop.
3 pm til 5 pm - Jerry Lovell – Grinding for Profit
Jerry is a Level 10 and attended the GCA Masters course and learned his grinding techniques there. He has been doing this for some time in his shop and he will demonstrate how to use the Jet Tool for grinding heads
We will have the Jet Tool in the shop this year and Jerry will give us a demonstration on grinding heads on this tool. All the belts needed for grinding and polishing will here and we will have a full set up to show polishing too. Jerry will give us all the information we need to set up a grinding and polishing business in our shops. One more profit center, and one more way to distinguish our expertise from our competition.
Thursday & Friday Evenings - November 6 & 7
Wedge Fitting Certification Class
Get your certification for fitting wedges from Mr. Wedge
Presented By Terry Koehler – Eidolon Wedges
Details and times - TBA
Saturday November 8
9 am til 9:50 am – OptimalFlight Trajectory Software
10 am til 10:50 am – Eidolon Wedges
11 am til 11:50 am - SK Fiber Shafts
12 Noon til 12:50 pm - True Length Technology
12:50 til 2:00 pm Break For Lunch
2:00 pm til 2:50 pm - MOI Golf - Tracy Wallace
Time remaining - Hands on work shop and Q & A from attendees on all subjects.
*Please Note: This schedule is correct to the best of our knowledge at this time and we have made a good faith effort to insure the accuracy of the listings. However, Speakers and Times are subject to change due to circumstances beyond our control. We make no warranties or guarantees that all or any speaker or speakers will appear as listed..
Additional Certification Programs Available
The following courses will be applied to the AGCP Master Fitting Certification Program when the program is put into place. These certifications will be required to achieve the rank of AGCP “Master Fitter”.
Due to the fantastic acceptance of True Length Technology TM by some of the Best Clubfitter's in the World, I have decided to add a Certification School to help each of you to better understand True Length Technology TM theories and background. We will certainly go over the basics, but there are advanced techniques that will be covered extensively. There are some exciting new methods in the works that will help fine tune your efforts and allow you to build to even tighter tolerances.
Certified True Length Technology TM Fitters will have the advantage of being on a 'Recommended' Users group listing that will point out why golfers should and will seek out their services. Many of you have got referrals and business from the current 'Users Group' listing, so the 'Certified' listing will enhance your profile even more. True Length + True Lie = True Ball Flight = True Length Technology TM
Doing the best job we can as 'Certified Fitters' will continue to advance not only True Length Technology TM, but the AGCP as well.
Bonus
This year I added a 'Master Series' True Length Technology TM Build Methodology that will be covered fully. It has some advanced computer shaft profiling techniques that will turn an average set of shafts into a profile slope suitable for a 'Master Series' build (without nibbling away the tip to satisfy a butt frequency!). Feedback from the True Length Technology TM Shaft Profiling Methodology has been fantastic. Build either a stiffer or softer slope where the overall profile is 'Averaged', relying less on butt frequency numbers. The end result is a 4 or 5 stage profile that can be shown to your customer, with all stages of the shaft graphed and plotted with relative ease. A permanent record will be in your possession for future reference. A 'Master Series' build is a premium level build that is only available as a 'Certified True Length Technology TM Fitter'. Take advantage of this AGCP offer.
If you are a current True Length Technology TM Registered User - $109
If you are wanting to become a Registered True Length Technology TM User - you will receive all my charts, build methodology and become Certified for $309
Thank You
Dan
Owner - True Length Technology TM
Awarded 'Best New Fitting Idea - 2007' Association of Golf Clubfitting Professionals (AGCP)
Maltby Clubmaking Academy - Master
Professional Assembly and Repair
Certified Rifle Center
Golf Clubmakers Association (GCA) Advanced / Professional
Professional Clubmakers Society (PCS)
Phone : 905-263-8510
www.truelengthtechnology.com
OptimalFlight Certification Class
This is an early-bird Roundtable class (Wednesday, November 5th, From 5:30-8:30 pm) following TLT Certification.
The OptimalFlight Certification course is a unique golf industry class that will prepare you to responsibly:
• interpret launch monitor data from any system (TrackMan, Zelocity, Vector, Flightscope, GA2) using OptimalFlight software
• conduct equipment studies and learn best practices from AGCP OptimalFlight users.
• expand your fitting services: driver optimization, full bag distance profiling, distance gapping, 3w/5w/hybrid fittings, ball, clubhead, driver and iron shaft studies
• complete specially designed work sheets to conduct experiments of any kind
• generate easy-to-understand session summary reports for your customers
• utilize OptimalFlight’s 12 dimensional ball flight world
Every club-fitting professional, launch monitor operator, golfer, and golf instructor will benefit from this three hour hands-on class. It goes beyond gathering basic launch monitor data, and provides you (and your staff) with the tools to use this data effectively. The open style of the class will help you learn from OptimalFlight experts users and best practices. You will discover how OptimalFlight can be a powerful learning tool and ways it can complement your launch monitor system and make a difference in your world-class fitting services or golf game.
This class includes a buffet style dinner and offer a hands-on learning experience with OptimalFlight software.
NOTE: Participants will need to bring their own laptop with OptimalFlight installed and running.
Current OptimalFlight user: $145
• Dinner
• Hand-out reference book covering training class materials and examples.
• Includes a bonus OptimalFlight license
New OptimalFlight user: $275
• Dinner
• Hand-out reference book covering training class materials and examples.
• Includes two OptimalFlight licenses, and 3 year listing of fitting services.
Price: $275.00
Terry Koehler, President of EIDOLON Golf, will present a special AGCP Program on the new EIDOLON “WedgeFit™” process on Thursday & Friday November 6 & 7 from 6pm until 9pm.
EIDOLON has established itself as a leader in custom fitting of wedges and this school will prepare you to make custom wedges a mainstay of your business.
In two three hour sessions, you will learn the ins and outs of wedges and how to fit your customers properly to fit their games and meet their needs. Topics of this fast-paced and interactive school include:
• Course Presented by Terry Koehler - Eidolon Wedges, personally
• All registrants will receive Dinner included both nights; and the class followed by cocktails and discussion hosted by EIDOLON
• All registrants will receive a Coupon for 20% off on up to $1,000 in EIDOLON and “WedgeFit™” components
• All registrants will receive all course materials, including workbooks, fitting charts and WedgeFit™ video for reference
• All About Wedges – what makes them work – grooves, bounce, shafts, weight distribution, etc.
• Basics of Wedge Technique – you can help your golfers learn good setup, grip, posture and fundamentals – fix before you fit.
• Finding the right mix – Every golfer has one proper mix of wedges he/she requires to optimize their games; here’s how to find it
• Fitting Wedges – How to determine how the wedges should blend to the short irons – length, lie angles, shaft weight and flex
• The EIDOLON “WedgeFit™” system – This completely new and innovative system will be introduced by EIDOLON in the Fall of 2008, and the AGCP class will be the first to have it presented. New shaft technology, new online interactive fitting process and improved short game play for any golfer will make you a Master WedgeFitter when you graduate this certification.
Total Cost of this Certification Class will be $209 per person and can be paid at the AGCP Store.
Please see our web site for a list of exhibitors. All sponsors who speak will exhibit and we will have additional exhibitors that will come in long after this has been printed.
* Disclaimer: Please note that we make every effort to get an accurate schedule on the web site. Sometimes due to circumstances beyond our control speakers may change and presentations may change. This is our best attempt at an accurate representation of the events we have planned but is not guaranteed to be 100% accurate at the time of the Roundtable. Speakers and Times are subject to change due to circumstances beyond our control.
We make no warranties or guarantees that all or any speaker or speakers will appear as listed.
We will have an exhibit area with Vendors displaying their products throughout the sessions. All of the speakers listed for Saturday will be here with their products and we have on going discussions with several more. Not all vendors will speak to you. We will have table set up for vendors to display their products in a separate part of the building.
Register for the Roundtable here...
|
